SPONSORS
2024 ICRBE EXPO |
Threadmaster over Flexcoat
Posted by:
Ash Carlton
(---.fairchildproducts.com)
Date: August 01, 2008 10:15AM
I noticed last night that I won't have enough Flexcoat to finish my current project (a holographic wrap). Will it be okay to use Threadmaster to finish the wrap or do I need to start over and just use Threadmaster? Ash Re: Threadmaster over Flexcoat
Posted by:
Herb Ladenheim
(---.hsd1.fl.comcast.net)
Date: August 01, 2008 10:31AM
Don't mix two finishes.
Herb Re: Threadmaster over Flexcoat
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: August 01, 2008 10:49AM
Not sure what you mean. Are you talking about some guides done with FC and some with TM? 2nd coat of TM over first coat of FC? If so, there would be no problem. That is often done. If you are taliking about actually mixing the different brands together, the answer would be no Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Edited 1 time(s). Last edit at 08/01/2008 01:44PM by Mike Barkley. Re: Threadmaster over Flexcoat
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: August 01, 2008 12:02PM
Like Mike Stated Ash, you can use one finish over the other and be fine, but you cant mix them in liquid form at all.
If you have one coat of Flexcoat on the rod and it's no longer wet or tacky, you can mix up Threadmaster and use it as your 2nd coat and be fine. DR Re: Threadmaster over Flexcoat
Posted by:
Ash Carlton
(---.fairchildproducts.com)
Date: August 01, 2008 01:35PM
I don't want to mix the two in a liquid state. I just want to use Threadmaster over cured Flexcoat. I'm working on a holo wrap and wasn't paying attention to the amount of Flexcoat I had left to do all the layers with. So one layer of FC and the rest of TM is ok. Thanks guys!! Re: Threadmaster over Flexcoat
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: August 01, 2008 01:43PM
Yep! you got it....TM over cured FC is just fine.
DR Sorry, only registered users may post in this forum.
|