SPONSORS
2024 ICRBE EXPO |
Batson Forecast Flyrod Blank
Posted by:
Dave Damon
(76.252.165.---)
Date: July 25, 2008 09:21PM
Hi,
I have a couple of Forecast F763-2 flyrod blanks that I'm trying to put together for my wife and I. I went to Batson's website and it appears they are redesigning it. Looks pretty cool so far...BUT I need guide size and spacing info and that part of the website isn't up yet. If anybody can chime in and give me that info, it would be greatly appreciated. Thanks, Dave Re: Batson Forecast Flyrod Blank
Posted by:
Harold Dean
(207.194.36.---)
Date: July 25, 2008 10:01PM
Dave:
Here's the spacing chart that I use, but keep in mind every blank is a little bit different, so this will give you the starting point. Static testing from here will put them right on. From the tip-top - 4.5, 9.5, 15.5, 22.5, 30.5, 39.5, 49.5, and 61.5. The guide sizes are - 4 # 1's, 3 #'2 and either a #8 or #12 stripping guide, your choice on the stripper. Harold Re: Batson Forecast Flyrod Blank
Posted by:
Dave Damon
(76.252.165.---)
Date: July 25, 2008 10:58PM
Thank you Harold. I appreciate all the info.
Dave Re: Batson Forecast Flyrod Blank
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: July 26, 2008 02:19AM
I use a spacing pretty close to Harold's but I use much smaller guides on a 3 wt. I'd use a 10 stripper, than a 3, a 1 and than 2/0 to the small loop tip. Sage uses 2/0 and I haven't heard any one complain yet. Re: Batson Forecast Flyrod Blank
Posted by:
Harold Dean
(207.194.36.---)
Date: July 26, 2008 10:39AM
Spencer, my knots are bigger.. Lol
Harold - Note to self...User smaller nail when joining leader to flyline. Re: Batson Forecast Flyrod Blank
Posted by:
Lynn Leary
(---.hsd1.ca.comcast.net)
Date: July 27, 2008 01:55PM
Dave,
This is Batson's recommendation for guide size and spacing on that model: F763-2 Dark Blue Gloss 7'6" 2 4.5"---9.5"---15.5"---22.5"--30.5"--39.5"-49.5"--61.5" 3 (sf)-3 (sf)- 3 (sf)---3 (sf)--4 (sf-)-4 (sf)-4 (sf)-12 (ud) Hope this helps! Lynn Double LL Fly Rods Sorry, only registered users may post in this forum.
|