SPONSORS
2024 ICRBE EXPO |
Under-wrap finish?
Posted by:
Robert Bryson
(---.ard.bellsouth.net)
Date: July 12, 2008 01:50PM
I want to add an extra guide on one of my poles. The guides on it are underwrapped with red thread and I want to match this with the extra guide. My question: Do I put some kind of finish on the underwrap before I put on the guide?.........If so, what kind of finish do I use?.......The only fod finish I have is Cabela's and it is high-build stuff.........MANY THANKS in advance Re: Under-wrap finish?
Posted by:
Anonymous User
(Moderator)
Date: July 12, 2008 05:41PM
You don't have to, but it will help you make the overwrap. You can use high build epoxy if you like, just put it on thin. You only need to sort of seal the threads so that the overwrap won't tend to dig into them. So don't over do it.
............ Re: Under-wrap finish?
Posted by:
Barry Thomas Sr
(---.hsd1.nj.comcast.net)
Date: July 12, 2008 06:22PM
Brush on the finish then use the brush "DRY" to take of the excess finish so you only have a thin "wet Coat" Re: Under-wrap finish?
Posted by:
Anonymous User
(Moderator)
Date: July 12, 2008 08:36PM
Or... use a stiff brush. That tends to automatically reduce the amount of finish that you can apply.
............. Re: Under-wrap finish?
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: July 13, 2008 10:57AM
Or, use a thin flexible spatula, not too dissimilar from a stiff brush.
Terry Sorry, only registered users may post in this forum.
|