SPONSORS
2024 ICRBE EXPO |
Rod cases
Posted by:
Joel Wick
(---.choiceone.net)
Date: July 02, 2008 04:53PM
Need a hard rod case for a 7 1/2' one piece casting rod, on the order of the REC cases. Needs to be at least 2 1/4" in diameter. Does anyone know if REC will make them longer than 7'? Other sources? Re: Rod cases
Posted by:
Anonymous User
(Moderator)
Date: July 02, 2008 05:16PM
You can contact REC and ask. They'd be your best bet for that information.
Check the sponsor list for Swensen Outdoors as well. You'd have to provide the tube, but they sell nice, durable hardware for a no-nonsense tube that will take a beating and stay with you. ................ Re: Rod cases
Posted by:
Russ Pollack
(---.dhcp.embarqhsd.net)
Date: July 02, 2008 10:58PM
I might be wrong but I think Swifty Mfg had some tubes. They are a sponsor too.
Uncle Russ Calico Creek Rods Sorry, only registered users may post in this forum.
|