SPONSORS
2024 ICRBE EXPO |
Fuji Pearl Brown Reel Seat
Posted by:
James Goughnour
(---.payson.az.npgco.com)
Date: June 11, 2008 03:33PM
I'm building a 6'3" spinning rod using a St. Croix SCV pearl brown blank. I'm trying to find a reel seat that matches the blank color. Graphite looked terrible so I ordered one of the cobra color seats but it still doesn't match. I know St Croix uses a Fuji DNPSM reel seat on this rod but they must have someone paint them. I can't find any suppliers that sell either the DNPSM or an insert for a DPSM seat in a brown color. If I can't find one my option is to paint a DPSM style but my fear with this method is the paint on the treads will wear off over time. I can buy a auto touch up spay can that appears to match but I only want to do this if I can't find someone that sells a gloss brown reel seat either in DNPSM or DPSM.
If anyone knows of where I can purchse one of these seats I'd appreciate knowing. Thanks Jim Re: Fuji Pearl Brown Reel Seat
Posted by:
Erik Repyneck
(---.102.143.187.res-cmts.sm.ptd.net)
Date: June 11, 2008 03:59PM
Jim,
I too have had the same problem. I went with the Pac Bay Dynawood reel seat. It had a nice deep brown wood finish that matched the SC V nicely. Check out Mud Holes zebra wood. I know these aren't pearl brown, but both look good. Erik Repyneck Re: Fuji Pearl Brown Reel Seat
Posted by:
Jim Gamble
(---.187-72.tampabay.res.rr.com)
Date: June 11, 2008 04:23PM
Try one of the Pac Bay Slim Channel Lock reel seats in Bright Gold ... it looks good IMO. Re: Fuji Pearl Brown Reel Seat
Posted by:
Anonymous User
(Moderator)
Date: June 11, 2008 05:25PM
RodMaker Volume 9 #5 and Volume 9 #6 contain articles on powder coating such components. The coating is extremely durable and long wearing.
If you do not want to try your own hand at this (it's pretty easy and not very expensive) you might contact Mud Hole and inquire about their painted seats. I believe they source these from Matagi in Japan. ................. Re: Fuji Pearl Brown Reel Seat
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: June 11, 2008 08:36PM
Matagi has a PERFECT paintjob to match that color. He does it in solid color, as well as marbelized. My friend has one for a Brown Seeker, which is absolutely spectacular. Wwell worth the price. Re: Fuji Pearl Brown Reel Seat
Posted by:
Ray Zarychta
(---.ri.ri.cox.net)
Date: June 11, 2008 08:54PM
I've been using the Cabela's woven graphite spinning reel seats in brown for all the SCV spinning rods I build and customers have been very pleased with the outcome. I also usually cut about an inch of thread off the seat, it's not needed for the rods I build and helps to reduce overall rod weight. Ray Zarychta Glastonbury, CT Re: Fuji Pearl Brown Reel Seat
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: June 12, 2008 12:27AM
Mudhole also has the tigereye brown marblized spinning reel seat. Re: Fuji Pearl Brown Reel Seat
Posted by:
Mark Fisher
(---.sa.bigpond.net.au)
Date: June 12, 2008 07:05PM
Take Billy's advice and get a Matagi seat. I've been using a few of them lately and they are a stunning piece of gear. Look up the website and view their components. Amity Harbor Outfitters are one of the dealers in the US but you may have to wait a while. We Aussies are still lucky enough o be able to order direct and Mamoru is very customer friendly.
Regards Mark Sorry, only registered users may post in this forum.
|