SPONSORS
2024 ICRBE EXPO |
Guide Size?
Posted by:
Brian Murphy
(---.bak.res.rr.com)
Date: May 27, 2008 07:54PM
Guys: My buddy has asked me to replace the tip top guides on two of his rods but I'm not sure what size to order to replace them. I'm almost positive they are fuji concept guides. The baitcasting rod is a Bass Pro Shops "Extreme" rod; 6.6' medium action. The spinning rod is a Bass Pro Shops "Pro Qualifier" rod; 6' medium action. Any help you could give me on ordering the guide size would be much appreciated. Re: Guide Size?
Posted by:
Mel Shimizu
(---.lsanca.btas.verizon.net)
Date: May 27, 2008 08:50PM
If they are Fuji concept guides, the sizes of the guides should be stamped on the frame. Re: Guide Size?
Posted by:
Anonymous User
(Moderator)
Date: May 27, 2008 10:33PM
If you don't see a number stamped on the frame as Mel suggested, measure the guide ring outside to outside of the ceramic portion.
............... Re: Guide Size?
Posted by:
Mick McComesky
(---.244.36.222.Dial1.StLouis1.Level3.net)
Date: May 27, 2008 10:36PM
Measure the rod at the tip. Convert that measurement to 64ths. That is the tube size. Measure the outside of the ceramic ring and convert to mm's. That's your guide size. Re: Guide Size?
Posted by:
Brian Murphy
(---.bak.res.rr.com)
Date: May 28, 2008 12:07AM
Thanks guys. As usual, you are huge help. Sorry, only registered users may post in this forum.
|