SPONSORS
2024 ICRBE EXPO |
Wrapper Rollers
Posted by:
mike arnold
(---.mannford.ok.mbo.net)
Date: May 01, 2008 11:41PM
I am in need of some new rollers and would like to know what has been the best thing to upgrade to on the forcast wrapper? Re: Wrapper Rollers
Posted by:
Terry Turner
(---.hsd1.or.comcast.net)
Date: May 02, 2008 12:15AM
You can replace the old ones by ordering from Mud Hole or other suppliers.
You can also replace the O rings from the hardware store as well. If you are looking to upgrade, not sure how well some of the replacement roller ideas would work on the Forecast wrapper. Many have used roller skate wheels or furniture casters fitted with O rings, but I think these would requre a larger holder/stand. Terry Re: Wrapper Rollers
Posted by:
Chris Davis
(216.186.209.---)
Date: May 02, 2008 03:19AM
Terry- your mention of skateboard wheels jogged my memory. They have excellent bearings in them . While in a local hobby shop recently picking up some art type brushes, something caught my eye. They have air filled rubber wheels for R/C airplanes. Real soft, would grip like the O rings do. I remember seeing some that were about 2 in. in diameter and probably 3/4 in. in width. I would bet they come in many different sizes. Just a thought. Re: Wrapper Rollers
Posted by:
Thomas,Barry
(---.hsd1.nj.comcast.net)
Date: May 02, 2008 06:02AM
[www.smallparts.com]
[www.savacable.com] [www.savacable.com] (W/O Bearings) [www.smallparts.com] Edited 3 time(s). Last edit at 05/02/2008 06:05AM by Thomas,Barry. Sorry, only registered users may post in this forum.
|