SPONSORS
2024 ICRBE EXPO |
Name labels??
Posted by:
Steve Chontos
(---.delta.com)
Date: April 21, 2008 02:36PM
I thought about using labels for my rods instead of hand-writing my name or anything else. Those of you who use labels, where do you get them?
Thanks, Steve Re: Name labels??
Posted by:
mike arnold
(---.mannford.ok.mbo.net)
Date: April 21, 2008 03:04PM
Hey Steve The best place is at Decal Connection They do some fine work and really fast service they are great. Re: Name labels??
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: April 21, 2008 03:07PM
Decal Connection! Give them a call. A full sheet of your labels is pretty inexpensive. They do great work Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Name labels??
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: April 21, 2008 03:38PM
Here's a third vote for Decal Connection. No doubt about it ... a great group to do business with. Re: Name labels??
Posted by:
Fred Halfheimers
(---.milwpc.com)
Date: April 21, 2008 04:01PM
Only one place,,,,,,,,,,,DECAL CONNECTION. Re: Name labels??
Posted by:
John Sams
(---.listmail.net)
Date: April 21, 2008 04:55PM
If you wwant to try your hand at it there was an article that showed up in Rodmaker that told how to make your own labels for rods on your inkjet printer. They work real good if you follow the directions. Mine are holding up great even in the sun. Re: Name labels??
Posted by:
Anonymous User
(---.southslope.net)
Date: April 21, 2008 11:15PM
David Rogers Wrote:
------------------------------------------------------- > [cabochonrods.com] > > My labels look great and cost me virtually > nothing. > > Dave > www.cabochonrods.com They did come out fantastic. Great tutorial. I will be giving this a shot. Thanks for sharing. Scott Re: Name labels??
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: April 21, 2008 11:18PM
I also used Decal Connection before I got my Alps printer. Now I make my own waterslides. Bill in WV Re: Name labels??
Posted by:
Russ Pollack
(---.sw.biz.rr.com)
Date: April 22, 2008 01:28AM
Tightlines makes sheets of label decals to your custom order and will mess with the fonts and styles for you till you're happy.
Also, Testors (the model paint people) make a decal kit and also supplies additional papers, fixative, and the needed software to make your own. Uncle Russ Calico Creek Rods Re: Name labels??
Posted by:
Steve Chontos
(---.delta.com)
Date: April 22, 2008 05:59AM
As always, you guys have some great information. The custome labels from cabochonrods look great, I am going to try that out soon. I had also thought about trying to get some clear mailing labels for my general information like name and phone number, has anyone tried that route?
Thanks, Steve Re: Name labels??
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: April 22, 2008 09:34AM
Steve -
I have tried almost everything imaginable ... IMO, nothing beats the service, selection, ease, quality and price of Decal Connection. Obviously, some people have found other methods that are acceptable for their situation. However, as a OCP riddled full-time custom builder - I have not. Re: Name labels??
Posted by:
Aaron Cavanaugh
(---.mn.warpdriveonline.com)
Date: April 22, 2008 12:26PM
John Sams Wrote:
------------------------------------------------------- > If you wwant to try your hand at it there was an > article that showed up in Rodmaker that told how > to make your own labels for rods on your inkjet > printer. They work real good if you follow the > directions. Mine are holding up great even in the > sun. What issue of Rodmaker was that in? AC FishinFreaks Rogers, MN Re: Name labels??
Posted by:
John Repaci
(---.ri.ri.cox.net)
Date: April 22, 2008 01:29PM
RodMaker Vol 9, issue 3 Sorry, only registered users may post in this forum.
|