SPONSORS
2024 ICRBE EXPO |
Working height??
Posted by:
John Martines
(---.proxy.aol.com)
Date: April 15, 2008 09:34PM
I'm getting a work bench set up and was wondering what the heights you guys have yours set at? Also what type of chair or stool do you guys prefer? Re: Working height??
Posted by:
Anonymous User
(Moderator)
Date: April 15, 2008 09:41PM
I like to keep my feet off the floor so I'm working higher than most - stand up height used with a high stool. My bench has a foot board speed control (RodMaker series on mobile rod building workstation) otherwise you need to make sure you can comfortably reach your foot control.
............... Re: Working height??
Posted by:
Thomas,Barry
(---.hsd1.nj.comcast.net)
Date: April 15, 2008 10:06PM
Bench height is 34" and I like tom use a foot control board and a higher chair
[www.rodbuilding.org] Edited 1 time(s). Last edit at 04/15/2008 10:15PM by Thomas,Barry. Re: Working height??
Posted by:
Matt Davis
(---.prtel.com)
Date: April 16, 2008 07:36AM
30" height.
I use an adjustable height padded seat rolling stool. Got it as a gift for the garage. Loved it at the workbench so its never left there. ............................ Better to have and not need than to need and not have. Re: Working height??
Posted by:
Mark Ganrude
(---.odec.com)
Date: April 16, 2008 03:43PM
52" height.
I work standing up. Re: Working height??
Posted by:
John Martines
(---.proxy.aol.com)
Date: April 16, 2008 04:50PM
Ok, Thanks for the replys. I'll have to play with heights to see where I will be most comfortable. I was thinking a stool with wheels would be Ideal! Sorry, only registered users may post in this forum.
|