SPONSORS
2024 ICRBE EXPO |
Need blank recommendation
Posted by:
Terry Reece
(---.nets.nemais.navy.mil)
Date: April 14, 2008 08:58AM
I'm looking for a 10' fiberglass 1 piece blank. I need it to work with 2-5 ounces, and be a medium taper rod. Those aren't hard and fast rules, but the capability to throw 4 ounces well would be great. It's going to be used for sea mullet, flounder, croaker, puppy drum, etc. from the surf. I've been looking but can't seem to find anything.
Thanks, Terry Re: Need blank recommendation
Posted by:
Anonymous User
(Moderator)
Date: April 14, 2008 09:04AM
Have you looked over the Lamiglas surf offerings? I'm not up to speed on them lately but they used to have quite a bit in the 1-piece surf rod line.
.............. Re: Need blank recommendation
Posted by:
mike arnold
(---.mannford.ok.mbo.net)
Date: April 14, 2008 09:16AM
Hey Terry
If you just want a good fiber blank look at the ones that CUI Product have. I have built a lot of these and can say they will throw up to a 6+bait with no problem. Re: Need blank recommendation
Posted by:
Ken Finch
(---.coi.bellsouth.net)
Date: April 14, 2008 09:17AM
Mud Hole usually has some various one piece sticks in glass. Re: Need blank recommendation
Posted by:
John Martines
(---.proxy.aol.com)
Date: April 14, 2008 02:41PM
Seeker SJ-100 makes a nice rod and is rated about 2 to 4, The Lami SB-1213M is a very popular E-glass and rated for about what you need. Sorry, only registered users may post in this forum.
|