SPONSORS
2024 ICRBE EXPO |
Thanks, Billy V
Posted by:
Mark Ganrude
(---.odec.com)
Date: April 03, 2008 08:53AM
for the link to your tutorial on tieing off decorative wraps.
Gave it a shot last night and it worked like a champ. Gotta say I was a bit nervous cutting thu those first few threads, but everything held together fine and the tie offs came out great. Thanks again, Mark Re: Thanks, Billy V
Posted by:
Billy Vivona
(160.254.20.---)
Date: April 03, 2008 09:24AM
This is another very good thread (imo) on this subject: [www.rodbuilding.org]
Your welcome, I'm glad it worked out for you. Re: Thanks, Billy V
Posted by:
Henry Engle
(---.nyc.res.rr.com)
Date: April 03, 2008 09:32PM
After I lost a few wraps due to the slip (blade slipped and thread slip LOL) thing. I just put on a very light coat of finish, let it dry before I cut anything and not worry about the threads coming undone anymore. Sorry, only registered users may post in this forum.
|