SPONSORS
2024 ICRBE EXPO |
Quick Slip Wing Nuts
Posted by:
rick brixon
(---.gvllcmtc01.gnvlnc.ab.dh.suddenlink.net)
Date: March 17, 2008 05:32PM
A few years ago in RodMaker Magazine there was a mention about quick slip wing nuts for making a cork compression unit. Any help finding them would be appreciated. NOONE around here (Eastern NC) seems to know what I am talking about.
Thanks, Rick Re: Quick Slip Wing Nuts
Posted by:
Anonymous User
(Moderator)
Date: March 17, 2008 05:38PM
McMaster-Carr has them for sure. Buddy Owens put me onto them. I'd have to check with them for the mechanical name, but I seem to recall they're called Quick-slip or Quick-adjust nuts. Something like that. You cock them to one side and they'll slide freely on any threaded rod. Set them back perpindicular and they function like regular nuts.
......... Re: Quick Slip Wing Nuts
Posted by:
rick brixon
(---.gvllcmtc01.gnvlnc.ab.dh.suddenlink.net)
Date: March 17, 2008 06:03PM
I checked McMaster-Carr and could not find them by using quick-slip or quick-adjust Re: Quick Slip Wing Nuts
Posted by:
Anonymous User
(Moderator)
Date: March 17, 2008 06:07PM
You may have to call and ask. I may not have the name right.
.............. Re: Quick Slip Wing Nuts
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: March 17, 2008 06:09PM
These would work great on 1/4 or 5/16" threaded rod [www.rockler.com] Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Quick Slip Wing Nuts
Posted by:
Lynn Leary
(---.hsd1.ca.comcast.net)
Date: March 17, 2008 06:10PM
Is this what you are after?
[www.slip-onlocknut.com] Lynn Edited 1 time(s). Last edit at 03/17/2008 06:11PM by Lynn Leary. Re: Quick Slip Wing Nuts
Posted by:
Anonymous User
(Moderator)
Date: March 17, 2008 06:27PM
Not the same thing, but might still be helpful.
............... Re: Quick Slip Wing Nuts
Posted by:
Thomas,Barry
(---.hsd1.nj.comcast.net)
Date: March 17, 2008 07:11PM Re: Quick Slip Wing Nuts
Posted by:
Thomas,Barry
(---.hsd1.nj.comcast.net)
Date: March 17, 2008 07:11PM Re: Quick Slip Wing Nuts
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: March 17, 2008 07:25PM
Pipe clamps from a hardware store - sliding lock cog Re: Quick Slip Wing Nuts
Posted by:
Anonymous User
(Moderator)
Date: March 18, 2008 10:49AM
According to Buddy, McMaster-Carr sells them under the name of "quick acting nut/knob."
That's about all I can offer you. Hope that's the right name. .............. Re: Quick Slip Wing Nuts
Posted by:
John Repaci
(---.ri.ri.cox.net)
Date: March 18, 2008 03:26PM
See McMaster-Carr Catalog page 3140
www.mcmaster.com Re: Quick Slip Wing Nuts
Posted by:
rick brixon
(---.gvllcmtc01.gnvlnc.ab.dh.suddenlink.net)
Date: March 18, 2008 04:39PM
I found them from McMaster-Carr. They are on page 2158 and are called "Steel Fast Lock". Price is $3.74 each. Ordered two Thanks for all the effort of each one in helping me find these. Sorry, only registered users may post in this forum.
|