SPONSORS
2024 ICRBE EXPO |
Pac Bay Wrapper Part
Posted by:
David Spence
(---.ec.res.rr.com)
Date: March 08, 2008 04:32PM
I bought a Pac Bay Rodsmith this year and it has the deluxe with the tree jaw chuck and I have misplace the rubber-plastic pieces that fit on the jaws to get a better grip on hard surfaces. Can anyone tell me where I might find a couple of replacement sets, just in case? Thanks guys! Re: Pac Bay Wrapper Part
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: March 08, 2008 04:44PM
Donart had parts in stock last I checked.
Also try @#$%& They are MY go to folks for most stuff I need. If either of them are out of stock try Bob at Custom Tackle Supply Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Pac Bay Wrapper Part
Posted by:
Mark Griffin
(---.lsanca.dsl-w.verizon.net)
Date: March 08, 2008 05:10PM
I've got 'em Dave. haven't put them up on the site yet, but drop me a nore and i can get them to you. Mark Griffin [] C&M Custom Tackle San Dimas, California Re: Pac Bay Wrapper Part
Posted by:
john timberlake
(---.triad.res.rr.com)
Date: March 08, 2008 09:31PM
i cant believe you of all people misplaced something at your house. there seems to be rodbuilding stuff in every room. good luck finding them.
jp Re: Pac Bay Wrapper Part
Posted by:
Simon Oakley
(---.sydney.spin.net.au)
Date: March 08, 2008 11:39PM
Hi David
As well as the ones that came on your lathe they give you a spare set in the box as well. Re: Pac Bay Wrapper Part
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 09, 2008 02:39PM
Actually, I found that the plastic jaw liners really didn't keep the chuck from slipping off the grips very well.
I took off the jaw liners and simply used some contact adhesive to glue on a layer of cork over the jaws. The layer of cork on the jaws works much much bettr to hold the grips than the former plastic liner. Take care Roger Sorry, only registered users may post in this forum.
|