SPONSORS
2024 ICRBE EXPO |
Classic Custom Wood
Posted by:
Anonymous User
(---.ptld.qwest.net)
Date: January 17, 2008 12:54AM
I have been trying to contact them to get the instructions for the jig to make the elliptical handles.
There web page and email link seem to be broken. I have not tried to call yet. Most likely my next step. Re: Classic Custom Wood
Posted by:
Fred Halfheimers
(---.milwpc.com)
Date: January 17, 2008 04:17AM
I just clicked on the link to the left and it took me to his home page. Maybe try again? Re: Classic Custom Wood
Posted by:
Anonymous User
(---.ptld.qwest.net)
Date: January 17, 2008 07:53AM
The link here to his home page is fine, it's done by TK, it's when you get to his home page is where the problems start. Re: Classic Custom Wood
Posted by:
Anonymous User
(Moderator)
Date: January 17, 2008 08:47AM
The plans for the jig were in an earlier issue of RodMaker. Somewhere in Volume 7 or 8, I think.
You can check the online library here to find the exact issue in the RodMaker index. ............. Re: Classic Custom Wood
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: January 17, 2008 01:50PM
I believe it's Volume 7 issue 2. Bill in WV Re: Classic Custom Wood
Posted by:
Steven Libby
(---.hsd1.ma.comcast.net)
Date: January 17, 2008 06:41PM
7.4, page 22, Adventures with wood - by Ray Jorgensen. Sorry, only registered users may post in this forum.
|