SPONSORS
2024 ICRBE EXPO |
Rod spec sheets for customer rods
Posted by:
Brad Hetzel
(---.nc.res.rr.com)
Date: January 14, 2008 08:25PM
I know I have seen a copy of a sheet that records the customers name and rod build specs used for each custom blank on this forum. But I cannot find a copy of it anywhere on my PC. Could someone please repost a copy of what they use when building customer rods. Im wanting to start keeping this data on the rods I build. I have received some positive feedback on several of my rods, and I find myself clueless on the exact layout i used for these rods that Im wanting to duplicate.
Thanks for all replys Brad Hetzel Re: Rod spec sheets for customer rods
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: January 14, 2008 08:30PM
Your e-mail is hidden ... either e-mail me or unhide yours. I will gladly share my build sheet format with you. Re: Rod spec sheets for customer rods
Posted by:
Anonymous User
(Moderator)
Date: January 14, 2008 09:41PM
Look under my name on the photo page. That's where you've seen it.
.............. Re: Rod spec sheets for customer rods
Posted by:
Russ Pollack
(64.241.28.---)
Date: January 14, 2008 11:45PM
We have a rod spec/order sheet that we use for all our rods, including repair/rehab/refurbish as well as new custom. I can mail you one is you like.
Uncle Russ Calico Creek Rods Edited 1 time(s). Last edit at 01/15/2008 12:10AM by Russ Pollack. Re: Rod spec sheets for customer rods
Posted by:
Bruce Wetzel
(---.nmci.navy.mil)
Date: January 15, 2008 06:30AM
Brad, If you want to go a step further you can record some critical data on a small sheet of paper and insert it into the butt end of the rod before you apply the butt cap. I usually write down the rod specs, guide type, thread colors, and date of build. I roll up the paper, tie a small piece of cord around it, and leave a small tag end just under the butt cap. If I ever get the rod back for repairs in the future I'll have all the data I need to repair/rebuild it. Re: Rod spec sheets for customer rods
Posted by:
Karry Batson
(---.olympus.net)
Date: January 15, 2008 03:16PM
Description:
Rod Blank Model # Butt cap: Front Cap: Rear Grip: Handle Arbor: Reel Seat: Reel Seat Shim Foregrip: Winding Check: Hookeeper: Tip Top 1st guide from tip top 2nd guide from tip top 3rd guide from tip top 4th guide from tip top 5th guide from tip top: 6th guide from tip top: 7th guide from tip top: 8th guide from tip top: 9th guide from tip top: 10th guide from tip top: 11th guide from tip top: 12th guide from tip top: 13th guide from tip top: 14th guide from tip top: 15th guide from tip top: 16th guide from tip top: Guide spacing Specs(inches from tip, center ring over mark) Butt wrap length Tip wrap length Main Thread Color Trim Thread Color Wrap Instructions: Karry Batson Batson Enterprises Inc. Ph: (877) 875-2381 Fax: (360) 683-3579 karry@batsonenterprises.com www.batsonenterprises.com Re: Rod spec sheets for customer rods
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: January 15, 2008 04:36PM
This is very good and can be easily modified to fit your own needs [www.rodbuilding.org] Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Rod spec sheets for customer rods
Posted by:
Brad Hetzel
(---.nc.res.rr.com)
Date: January 15, 2008 05:25PM
Thanks Everyone!! Looking foward to this years show, it is so nice to be in Raleigh and have High Point in the backyard. But Im still planning on staying overnight and making a weekend out of it. See yall at the show!!
Brad Hetzel Sorry, only registered users may post in this forum.
|