SPONSORS
2024 ICRBE EXPO |
Any 6400 or 700 ex-fast spin jig blanks in High Point?
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: January 10, 2008 03:55PM
I'm daydreaming about panfish and wish the Lami XMG spin jig blanks were still available in the lighter powers. Are there other equivalent options out there other than Loomis? I would like to find a blank that still weighs in under an ounce but is very fast in the tip with ample backbone in the bottom. Re: Any 6400 or 700 ex-fast spin jig blanks in High Point?
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: January 10, 2008 04:36PM
Have you looked at the ATC line of blanks? There are some in their that might meet your needs. Angler's carries them. Re: Any 6400 or 700 ex-fast spin jig blanks in High Point?
Posted by:
Marty Martin
(---.gsp.bellsouth.net)
Date: January 10, 2008 04:52PM
Those blanks look nice, but also look heavier than what I had in mind; and I could buy the Loomis for no more money. Re: Any 6400 or 700 ex-fast spin jig blanks in High Point?
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: January 10, 2008 05:11PM
The LSJ781 is 7/8 ounce at 6'6". Todd at Lamiglas DOES allow and even encourage cutdowns. Those are great little blanks ... consider getting one or two and doing some experimenting - I think you might just be very pleased. Re: Any 6400 or 700 ex-fast spin jig blanks in High Point?
Posted by:
Anonymous User
(Moderator)
Date: January 10, 2008 05:29PM
You will find exactly what you're looking for at the ICRBE. There will be something like 15,000 rod blanks on display here and many of the manufacturers will have samples of all their models. Dealers will have many times over that. I found some very similar All Star blanks last year that were very close to the Loomis SJ700, nearly identical. I think I paid $10 each for them.
............. Re: Any 6400 or 700 ex-fast spin jig blanks in High Point?
Posted by:
Todd R. Vivian
(58.220.250.---)
Date: January 10, 2008 07:34PM
Don't forget that for those of you looking for the oversize surf 1pc. blanks you can save on shipping by picking them up there. Just let your dealer who will be showing ahead of time so they can schedule to have them shipped to High Point.
Todd Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Re: Any 6400 or 700 ex-fast spin jig blanks in High Point?
Posted by:
Don Baker
(---.dhcp.embarqhsd.net)
Date: January 11, 2008 11:25PM
I`ll second your wish about the Lami spin-jig XMG 700. It is , in my opinion, an absolutely fabulous crappie and white bass vertical jigging blank. PLEASE bring it back and promote it as a panfish blank, for that application it is a real jewel. Re: Any 6400 or 700 ex-fast spin jig blanks in High Point?
Posted by:
Todd R. Vivian
(---.lactaw.dsl.dynamic.tds.net)
Date: January 20, 2008 11:21PM
Mud Hole has 4 of the LSJ700 blanks left (as of this evening) on their discontinued listing.
You might want to check these out for now. Todd Regards, Todd Vivian Mud Hole Custom Tackle todd@mudhole.com Sorry, only registered users may post in this forum.
|