SPONSORS
2024 ICRBE EXPO |
loomis gl2
Posted by:
Alex Dziengielewski
(---.scana.com)
Date: January 07, 2008 09:40AM
Have a customer wanting a GL2 (baitcasting) built pretty much the same as the factory but with a spiral wrap. What type of guides is Loomis putting on the GL2?
Also, I've never seen a factory one, so any idea what color thread thay are using, or what would match well? I have a pretty good thread selection, but knowing my luck, it will be that one color I should have ordered! Thx! Re: loomis gl2
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: January 07, 2008 10:01AM
Fuji Aluminum Oxide guides Re: loomis gl2
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: January 07, 2008 11:58AM
I would look on their web site to see what they look like Re: loomis gl2
Posted by:
Alex Dziengielewski
(---.scana.com)
Date: January 07, 2008 01:37PM
I thought about that, but color settings, etc vary greatly. Sometimes it can vary greatly from reality.
I looked up their website, but couldn't find where they said type of guide. Thx. Re: loomis gl2
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: January 07, 2008 02:34PM
I already told you what guide ... Fuji Aluminum Oxide. Re: loomis gl2
Posted by:
Alex Dziengielewski
(---.scana.com)
Date: January 07, 2008 03:34PM
Jim... Saw that and said thanks (thx)...
i was just mentioning I coudln't find it online after the other post said look on their website. Sry for not being clear. Didn't want anyone thinking I was being lazy and just asking without putting some effort first. Re: loomis gl2
Posted by:
Spencer Phipps
(65.197.242.---)
Date: January 07, 2008 06:41PM
Dark blue blanks and it looks like black thread as ther is no bleed through from the thread with no CP. Re: loomis gl2
Posted by:
Larry Pollock
(---.sol.dsl.dynamic.acsalaska.net)
Date: January 07, 2008 11:20PM
Alex...Loomis GL-2 factory rods are blue with dark blue thread on wraps. I use GL-2 blanks and they are Granite color. I have not seen any blue blanks offered. Re: loomis gl2
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: January 08, 2008 12:41AM
Loomis offers GL2 factory rods in THREE colors ... Evergreen, Merlot and @#$%& each with different colors of wraps. ALL GL2 blanks are granite, a medium gray gloss. Re: loomis gl2
Posted by:
Fred Yarmolowicz
(---.georgewall.com)
Date: January 08, 2008 07:45AM
My GL2 factory rod is like a Slate Blue maybe a little darker.Its an older model though.The thread is dark blue(Navy?). Freddwhy (Rapt-Ryte) Re: loomis gl2
Posted by:
Alex Dziengielewski
(---.scana.com)
Date: January 08, 2008 11:28AM
I'll order the blank and see what I end up with! Thx! Re: loomis gl2
Posted by:
Jim Gamble
(---.126-70.tampabay.res.rr.com)
Date: January 08, 2008 11:37AM
If you order a blank ... I can guarantee you will be getting granite - a medium gray gloss. No doubt about it. It will even come with a custom blank label printed in matte gold (peel and stick) and the bag tag will be light tan parchment colored. Sorry, only registered users may post in this forum.
|