SPONSORS
2024 ICRBE EXPO |
Any sponsors have small I.D. cork rings
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: December 23, 2007 10:48AM
I am working on some UL spinners that have a butt dia. less than 0.250" I am looking for cork rings with small I.D. to leave something to ream. I know I have seen some with 0.187" I.D., but not at a sponsors site, and I do like to keep my business within our sponsors.
Thanks, Marc Re: Any sponsors have small I.D. cork rings
Posted by:
Russ Pollack
(---.dhcp.embarqhsd.net)
Date: December 23, 2007 10:51AM
Not a sponsor, just a builder, but I've got a few. How many do you need?
Uncle Russ Calico Creek Rods Edited 1 time(s). Last edit at 12/23/2007 12:25PM by Russ Pollack. Re: Any sponsors have small I.D. cork rings
Posted by:
steve stanfill
(---.hsd1.mi.comcast.net)
Date: December 23, 2007 12:14PM
Marc
Janns has1/8" I D ,1 1/8" O D rings. Steve Fish till you drop Re: Any sponsors have small I.D. cork rings
Posted by:
Marc Morrone
(---.dsl.airstreamcomm.net)
Date: December 23, 2007 12:23PM
Thanks Russ and Steve-
I need quite a few (couple hundred), but thank you for the offer Uncle Russ! I'll check out Janns. Marc Re: Any sponsors have small I.D. cork rings
Posted by:
Jim Reinhardt
(204.73.103.---)
Date: December 24, 2007 07:54AM
If you need top quality try REC rings with no hole and bore them yourself. REC has very nice cork, but it ain't cheap. Sorry, only registered users may post in this forum.
|