I know Amity Harbor stocks Matagi components but I'm having trouble understanding exactly what is offered on therir site. Does anyone else sell Matagi components? Thanks.

merrick tackle sells matagi, but their website is more confusing than amity's.

whoa, did i miss something? is "that company" not spoken of around here?

Heh good luck with that... That ordeal with the monopoly they have in this country is a mess. Watch out for the 3 month wait on parts.

Mud Hole's colored or painted seats and parts are Matagi.

................

Tim what are you looking for. IT's REALLY simple what component goes where. Look at Matagi's site and click on teh English version - it tells you EXACTLY what everything is.

there's got to be another company that makes colored aluminum winding checks



Edited 1 time(s). Last edit at 12/04/2007 01:56PM by Lance Lapeyrouse.

There is...FUji makes them too.

Johnny's pond stocks matagi products at the lowest prices.

Johnny's Pond
John Petrovsky, Owner
John @johnnyspond
1-888-NO-SNAGS
1-888-66-76247

The Rodworks. Great service, fast shipping and reasonable rates.

Thanks for the advice Billy but I do know what I want. On the Matagi website I'd like (2) HTWCB, a HTWCL, and a D16-VF. On the Amity Harbor website I can only distinguish winding checks under their part numbers as FPR16, K16HR, and RSR16. And when I click on any of those part numbers, the SAME popup lists the same 3 rings as HTWC, HTWCB, HTWCL - none of the numbers match and I can't decypher what ring goes with what part number. If you could translate it for me I would appreciate it. Thanks.

Sorry for the confusion, some of the rod building sections have to be re organized. I plan on doing this this weekend, you will find Matagi in the feather inlays,grips and supplies.

thank you
john

Johnny's Pond
John Petrovsky, Owner
John @johnnyspond
1-888-NO-SNAGS
1-888-66-76247

I'd like (2) HTWCB, a HTWCL, and a D16-VF.

OK, the D16-VF will only fit on teh threaded section of a size 16 reel seat. DPS or trigger style. If you would like another ring for the back of teh reel seat: for a DPS you want a D16-VR, and for a trigger seat an RSR-16, whch has a lip on it to fit inside the reel seat. THis fits an ECS or TCS style seat.

HTWCB is a regular winding check designed to go in front of the foregrip, or to be used as a transition from teh reel seat to teh blank without a foregrip.

The HTWCL is deisigned to work with a locking foregrip, either an HPS or KDPS. YOu need to size this to fit the ID of teh blank, when you glue the grip onto the seat,you also glue this on, then sand the grip to meet up with teh check. You MUST MUST MUST make sure teh reel seat is PERFECTLY centered, because when you turn the foregrip to loosen/tighten the nut, if the seat is not cenetered the check will rub on teh blank every 1/2 turn since it's not coencentric with the blank.

RSR16 fits inside a trigger reel seat, as stated.
The FPR-16 is designed to fit on teh locking foregrips mentioned, as a thin trim ring between teh foregrip material and the edge of the reel seat lip.
K-16HR fits the same as teh FPS, but on a different locking foregrip style, teh KDPS.

None of this is rocket science, go find MAtagi's website, and look at the English version - it spells everything you need to know out.

We can get anything from Matagi give us a call and we will get the stuff asap

Johnny's Pond
John Petrovsky, Owner
John @johnnyspond
1-888-NO-SNAGS
1-888-66-76247

The problem has never been getting the stuff, it's knowing what to get.

[www.rodbuilding.org]
[stripersonline.com]



Edited 1 time(s). Last edit at 12/06/2007 10:32AM by Billy Vivona.

check out our web site we just put everything in, and adding more there is sizing charts for the different reel seats ect. We will be more than happy to assists anybody with thier questions. If our price are to high that can be solved with a couple of key stokes, guaranteed.

thank you
john

Johnny's Pond
John Petrovsky, Owner
John @johnnyspond
1-888-NO-SNAGS
1-888-66-76247

the one component i see you don't show on your site is the HTWC-L Winding check, this is the one i am looking for. And by the way nice job on your site with these components.