SPONSORS
2024 ICRBE EXPO |
pearl metallic and permagloss
Posted by:
steve stanfill
(---.hsd1.mi.comcast.net)
Date: December 04, 2007 08:42AM
Just put the first coat of permagloss on metallic green with pearl metallic trim band wraps.The problem is the pearl(fairly bright white) turned to a dull white, and you can actually see the green thread under the white inlays. Should I have used CP to keep the metallic pearl from changing color and becoming transparent.
Steve Fish till you drop Re: pearl metallic and permagloss
Posted by:
John Britt
(---.96-97.tampabay.res.rr.com)
Date: December 04, 2007 10:17AM
Steve YES pearl is the one metallic that needs CP although sometimes the effects without it can be interesting
John Re: pearl metallic and permagloss
Posted by:
Randy Parpart (Putter)
(---.dsl.dynamic.nccray.com)
Date: December 04, 2007 02:29PM
More likely the hot solvent in the PG did something with the pearl thread. CP would still most likely fix the problem, though.
Edit: Got thinking on this; I've not used the pearl metallic (but do have it) and I've read somewhere that it does tend to go transparent with finish on it. Most likely wrong what I'd said above... Putter Williston, ND Edited 1 time(s). Last edit at 12/04/2007 02:39PM by Randy Parpart (Putter). Re: pearl metallic and permagloss
Posted by:
steve stanfill
(---.hsd1.mi.comcast.net)
Date: December 04, 2007 02:44PM
Thanks for the replies. Next time I use that roll of thread I'll know it's the one metallic that needs CP.Looking closer you can also see the black blank through the thread. I'd call it semi-transparent.
Steve fish till you drop Sorry, only registered users may post in this forum.
|