SPONSORS
2024 ICRBE EXPO |
CTS 15´6" guide question
Posted by:
Thomas Greising
(136.8.150.---)
Date: November 07, 2007 07:28AM
Any one that got that rod?
I´m in need of some base guide placement. It´s a 4 piece #9/10 Re: CTS 15´6" guide question
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: November 07, 2007 10:47AM
Here's one for a 15 ft 9 wt, just add another 6 inch spaced guide on the tip and move everything down to start your basic distribution test.
4 3/16, 9 1/2 15 9/16, 22 1/2, 30 3/4, 39 7/8, 49 9/16, 62 1/2, 76 7/16, 88 5/16, 103 1/16, 117 11/16, 136 3/4. Used a 20, 16, 12, 5, 5, the rest 4s. Some 15 ft rods I've seen are happy with as few as 11 guides it's just depends on the blank. Re: CTS 15´6" guide question
Posted by:
Tony Dowson
(---.ok.shawcable.net)
Date: November 08, 2007 03:00AM
Maybe give Bob Meiser a email(see RB Meiser link in sponsor's list) to see if he has anything similar in size or if he has any personal experience with that particular blank.
Re: CTS 15´6" guide question
Posted by:
Thomas Greising
(136.8.150.---)
Date: November 09, 2007 02:53AM
Tony Dowson Wrote:
------------------------------------------------------- > Maybe give Bob Meiser a email(see RB Meiser link > in sponsor's list) to see if he has anything > similar in size or if he has any personal > experience with that particular blank. > > Done that, but havent got any reply from him. He might be out fishing :-) Sorry, only registered users may post in this forum.
|