SPONSORS
2024 ICRBE EXPO |
Renzetti thread carriage hold Madeira thread
Posted by:
Scott Parsons
(205.244.119.---)
Date: October 23, 2007 04:33PM
Will the standard Renzetti thread carriage that comes with the lathe hold standard spools of Madeira thread? Thanks Re: Renzetti thread carriage hold Madeira thread
Posted by:
Anonymous User
(Moderator)
Date: October 23, 2007 06:20PM
Not sure but I'll ask Sammy to try some of his Maderia on his carriage tonight and let you know.
............. Re: Renzetti thread carriage hold Madeira thread
Posted by:
Steven Libby
(---.hsd1.ma.comcast.net)
Date: October 23, 2007 07:13PM
I recall Italo had to modify his renzetti carriage to make a certain spool fit, and found the following phot/posting about it...I dont know if it was madeira or not [www.rodbuilding.org] Re: Renzetti thread carriage hold Madeira thread
Posted by:
Sammy Mickel
(---.r4.ncreed.infoave.net)
Date: October 23, 2007 09:58PM
Yes, you will just have to pull the rod out a little farther on one side. Sorry, only registered users may post in this forum.
|