SPONSORS
2024 ICRBE EXPO |
different thread finish on different coats?
Posted by:
John Whiteside
(64.25.150.---)
Date: October 23, 2007 12:52AM
I just finished putting finish on a rod, but it was the last of my Thread Master.
I have two bottles of Flex Coat. Has anyone ever used a different finish on the second coat? Are they compatable? Re: different thread finish on different coats?
Posted by:
Russ Pollack
(64.241.28.---)
Date: October 23, 2007 12:57AM
I think you can put TM over LS. I don't know if it'd work the other way round, and I don't know if you can mix TM or LS with Flex Coat at all.
I'd just order some more TM. In general, we try to stay with one brand for a whole rod. Uncle Russ Calico Creek Rods Re: different thread finish on different coats?
Posted by:
Mick McComesky
(---.244.42.96.Dial1.StLouis1.Level3.net)
Date: October 23, 2007 01:33AM
I've often used FC over TM and LS with no problems to date. Like Russ, I prefer to stick with one brand if at all possible, but I'm "Applicationally Challenged" when it comes to TM and LS and often have to revert to my mainstay to get an acceptable finish.
I also generally use permagloss as a final coat over epoxy, which is a far greater difference in finish modulus than epoxy over epoxy, with, at least IMO, superior results than epoxy(ies) alone. Some have the same feeling on this practice as I have with thinning epoxy... (don't do it). Re: different thread finish on different coats?
Posted by:
Fred Yarmolowicz
(---.georgewall.com)
Date: October 23, 2007 08:00AM
The finishes have different yellowing characteristics,keep that in mind. Freddwhy (Rapt-Ryte) Re: different thread finish on different coats?
Posted by:
Anonymous User
(Moderator)
Date: October 23, 2007 09:53AM
Most of the 100% solids based epoxies can be applied over different brands with no problem. I'd stick with the same brand and type if it were me, but in a pinch you can do what you're asking and shouldn't have any problems.
.............. Re: different thread finish on different coats?
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: October 23, 2007 11:20AM
I've laid TM over Aftcote many times......
DR Re: different thread finish on different coats?
Posted by:
Billy Vivona
(160.254.20.---)
Date: October 23, 2007 11:49AM
Andy is going to KILL me with this one. I routinely mix 1CC of TM hardener, 1CC TM Resin, 1CC Aftcote Hardener, adn a1CC of Aftcote Resin - with no problems whatsoever. I couldn't keep it a secret any longer, hopefully he doesnt' see this and yell at me, lol. Re: different thread finish on different coats?
Posted by:
jon edwards
(---.mia.bellsouth.net)
Date: October 23, 2007 04:12PM
billy what does that do???? Re: different thread finish on different coats?
Posted by:
Billy Vivona
(160.254.20.---)
Date: October 24, 2007 08:43AM
Jon, who knows? lol. I just did it because I read somewhere at some point you can't mix finishes & etc. Myth Busted for TM & Aftcote. lol. Sorry, only registered users may post in this forum.
|