SPONSORS
2024 ICRBE EXPO |
metallic thread
Posted by:
Phil Ewanicki
(---.235.78.169.Dial1.Orlando1.Level3.net)
Date: October 18, 2007 10:42PM
Is there a significant loss of strength going from standard NCP size D thread to size D metallic thread? If so, what is the magnitude of this difference, closer to 10% or 50%? I mistrust spring scales in low weights or I would try to measure for myself. Re: metallic thread
Posted by:
jon edwards
(---.mia.bellsouth.net)
Date: October 18, 2007 10:46PM
there was a post about this a while ago showing numbers and if i remember correctly the MT thread was a little strong that nylon Re: metallic thread
Posted by:
Randy Parpart (Putter)
(---.dsl.dynamic.nccray.com)
Date: October 18, 2007 11:13PM
Jon's right, the Gudebrod metallics are slightly stronger than Gudebrod nylon threads. Putter Williston, ND Re: metallic thread
Posted by:
Phil Ewanicki
(---.235.78.161.Dial1.Orlando1.Level3.net)
Date: October 19, 2007 10:33AM
Thanks - I missed the first post. Sorry, only registered users may post in this forum.
|