SPONSORS
2024 ICRBE EXPO |
markings on fly rod blanks
Posted by:
Gavin Schar
(---.saix.net)
Date: September 15, 2007 04:00PM
Hi Guys,
Was wondering what pens you all use to personalise your rods. I have used gel roller pens before but I find that they smudge when I put the varnish on. What pens do the likes of Winston, Thomas & Thomas, Scott and Hardy use? I cant get the ink to flow properly and thus don't get a fluid inscription. Any ideas? Re: markings on fly rod blanks
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: September 15, 2007 06:40PM Re: markings on fly rod blanks
Posted by:
Tony Mortimer
(---.hsd1.ct.comcast.net)
Date: September 16, 2007 11:04AM
I've used gel pens successfully -- key for me is, I put a coat of color preserver on and let it dry before putting the epoxy finish protector on it....no smudging. Actually, I'm experimenting at present with using the gels to put the blank section alignment dots on (after all the finish applications) without CP or epoxy just to see how long they will last unprotected (I didn't like the extra coat of finish on top of them on previous rods).
Tony M Re: markings on fly rod blanks
Posted by:
Karry Batson
(---.olympus.net)
Date: September 17, 2007 02:18PM
Jelly Roller Gel pen made in Japan. Stapels use to sell them but not any more. I found them in various carft stores so should not be a problem finding them. I write on the first coat of rod finish then apply the second coat after. No Smug just let it dry a bit before ya put your finish on. Re: markings on fly rod blanks
Posted by:
Mike Ballard
(---.proxy.aol.com)
Date: September 17, 2007 09:52PM
The companies you mention don't use pens. They use either decals or have the stuff screen printed directly on the rod blanks. Re: markings on fly rod blanks
Posted by:
Gavin Schar
(---.saix.net)
Date: September 18, 2007 01:04AM
Ah, makes sense - I always wondered how someone could get soch uniformity on their markings!!! Thanks for all your suggestions, I'll try and get a hold of some of the jelly roller gel pens.
Best regards, Gavin Re: markings on fly rod blanks
Posted by:
alex kowalski
(---.dyn.optonline.net)
Date: September 18, 2007 09:28AM
write on a clear decal and then put it on looks alot neater Re: markings on fly rod blanks
Posted by:
Jimi Ellis
(---.hsd1.ga.comcast.net)
Date: September 21, 2007 09:12AM
Decal Connection sells alignment marks. [www.decalconnection.com] Sorry, only registered users may post in this forum.
|