SPONSORS
2024 ICRBE EXPO |
Hot Stuff CA and Quick cure spray now at Fishsticks 4u
Posted by:
Robert Tignor
(---.hsd1.va.comcast.net)
Date: August 29, 2007 07:14AM
The Hot Stuff CA and Quick cure spray as seen in Andys Lathe in Rodbuilding DVD is now in stock . When on our site click on Epoxy / Finish / Glue and scroll up . Robert Re: Hot Stuff CA and Quick cure spray now at Fishsticks 4u
Posted by:
Robert Egan
(---.mia.bellsouth.net)
Date: August 29, 2007 08:16AM
Robert I think you should add a more comprehensive description both here and on your website for this stuff. Not all of us have seen or will see that DVD.
Re: Hot Stuff CA and Quick cure spray now at Fishsticks 4u
Posted by:
Andy Dear
(---.sub-66-174-93.myvzw.com)
Date: August 29, 2007 10:37AM
Robert,
Hot Stuff can be used very effectively to fill cracks/voids etc.....when you're turning reelseats or handles out of wood. Additionally it makes quite a nice finish for small turnings like reelseats and pens. There are some secrets to maximizing the use of CA glue that you'll have to watch the DVD to learn, but basically that's what it's used for. As an aside, Dale Clemens emailed me a while back to tell me how much he enjoyed my DVD, and that not even he knew the little tricks I was using with CA glue to fill cracks and voids. Dale has sent me pictures of some of his hollow vase turnings, and they are simply jaw dropping....he is an awesomely talented woodturner. Andy Dear Lamar Fishing Re: Hot Stuff CA and Quick cure spray now at Fishsticks 4u
Posted by:
Robert Egan
(---.mia.bellsouth.net)
Date: August 29, 2007 11:14AM
Thanks Andy for this feedback. The more info us newbies can get the better our work will be.
Bob Sorry, only registered users may post in this forum.
|