SPONSORS
2024 ICRBE EXPO |
Lamiglass blank
Posted by:
Harry Kelly
(---.proxy.aol.com)
Date: August 24, 2007 04:36PM
Hello new guy here... Been lurking around here and reading posts.. Great site.. Does anyone know if the Lamiglass Tri-Flex BL 7030C blank still available. Thank you Harry Re: Lamiglass blank
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: August 24, 2007 07:00PM
Yes, but there's a little kink in the answer. Depending on which 7030 you have, it might be on a different blank. The "old" 7030 is built on the CGBT841MH blank, the new blank is built on teh 841M. The added the New M to the line up about 2 years ago.
There's quite a difference between the blanks/rods. Hang 20oz off the tip of the rod you have, if the rod is able to hold it without bending halfway to the ground - then the blank you wan tis the CGBT841MH. If the rod doubles over, then you want the 841M blank. Re: Lamiglass blank
Posted by:
Harry Kelly
(---.proxy.aol.com)
Date: August 25, 2007 09:09AM
Thank you Billy for the reply... Sorry, only registered users may post in this forum.
|