SPONSORS
2024 ICRBE EXPO |
Tigerwrap dilema
Posted by:
Aaron Anderson
(---.cust.wildblue.net)
Date: August 04, 2007 11:03AM
I did my first layer with purple and ncp white thread. The problem is I wanted the purple to be the dominate color. i already have one coat of finish on. My question is how will it look if I put purple back on for the second layer with the sacraficial thread. Any options or ideas would be appreciated. The rod wrap colors are purple with sunburst inlays. Thanks guys. Aaron Anderson Beaver Rods Re: Tigerwrap dilema
Posted by:
James(Doc) Labanowski
(---.proxy.aol.com)
Date: August 04, 2007 11:26AM
They way you have set it up it should come dominantely purple with white tiger stripes. Re: Tigerwrap dilema
Posted by:
Anonymous User
(Moderator)
Date: August 04, 2007 11:27AM
The top color is the dominant color in determining the overall wrap color. Putting purple on top will most likely do the trick for you.
The full wrap instructions along with a host of specific tips and tricks on getting the patterns and colors you want is in the volume 10 #2 issue of RodMaker. .................. Re: Tigerwrap dilema
Posted by:
Steve Edmondson
(---.187-72.tampabay.res.rr.com)
Date: August 04, 2007 11:28AM
The color you see through the bottom will be the lighter color. The overall effect will be purple with white stripes. My .02 is that a white/crimson or white/orange would have been better - only because you would get slight tinges of those colors to go with the sunburst... -Steve Tampa, FL Re: Tigerwrap dilema
Posted by:
Aaron Anderson
(---.cust.wildblue.net)
Date: August 04, 2007 11:36AM
Thanks guys, Just didnt want it to be all screwed up. Tom I have the Rodmaker mags wouldnt rod build without em'. Aaron Anderson Beaver Rods Sorry, only registered users may post in this forum.
|