SPONSORS
2024 ICRBE EXPO |
Wire Line and Pac Bay Boat Guides XBBG
Posted by:
Steve Lynas
(---.295.ca)
Date: July 11, 2007 10:31PM
This may be a stupid question but I just purchased some Pac Bay wired Frame Boat guides for a trolling rod I am re-building that uses wire line. I just assumed since they looked exactly like the guides I took off that they would be ok. Will the Stainless steel frame wear well over time against the wire lines. I am not sure the type of wire line and it is possible that stainless wire is being used.
Thanks Steve Lynas P.S Pac Bay XBBG model guidesn rated for saltwater use Steve Lynas Re: Wire Line and Pac Bay Boat Guides XBBG
Posted by:
Jesse Buky
(---.hr.hr.cox.net)
Date: July 13, 2007 01:34PM
I have built hundreds of wire line rods over the years and this is what I have found. If you are using braided wire [multi strand] use roller guides as the braided wire acts like a hacksaw blade and will cut SIC and Carbaloy guides, If using single strand any ring guide will work but Sic and Carbaloy are best. Jesse
Sorry, only registered users may post in this forum.
|