SPONSORS
2024 ICRBE EXPO |
Rogue Rod Guides
Posted by:
James Goughnour
(---.payson.az.npgco.com)
Date: May 26, 2007 01:07AM
I'm repairing four Rogue bass rods and want to make sure I get the exact replacement guides. I heard Rogue changed guide suppliers a couple years ago but I'm not sure what guides originally came on on these rods. Here is what I have:
711FS7C replacing 4th guide from tip. 05 is marked on the bottom decal MB704C replacing 5th guide from tip. 06 is marked on the bottom decal MB704C replacing 6th guide from tip. No year marking on bottom decal DS704S replacing tip top If you can tell me the sizes and original guide/tip suppliers I would appreciate it. Jim Re: Rogue Rod Guides
Posted by:
Spencer Phipps
(65.197.242.---)
Date: May 26, 2007 09:49AM
I'm not aware that Rogue has changes suppliers, all mI've seen have been Fuji Alconites. They have this information on their website. Measure the ceramic ring's OD to get the right guide size in mm. Measure rod tip in 1/64th of an inch to get the tube size to order. There are half sizes in the tube size. The paperwork says the DS704 blank I used was a 5 tube, that doesn't mean yours will be. Think it's listed as a 5.5 in the catalog. Re: Rogue Rod Guides
Posted by:
Bob Balcombe
(---.rb2.gh.centurytel.net)
Date: May 26, 2007 03:00PM
Here is their web site, it may clear up some ideas you may have [www.roguerods.com]
Good Wraps Bob Re: Rogue Rod Guides
Posted by:
Thomas Kaufmann
(---.nmci.navy.mil)
Date: May 26, 2007 04:21PM
the ones that I have at the house all have alconites on them. They are a few years old though.... ie.. 2003
Tom Kaufmann GySgt USMC Sorry, only registered users may post in this forum.
|