I'll be leaving for Woodland tomorrow right after work to join in on the fun at Lamiglas' factory. If there's anyone in the area that could make this, there's lots to enjoy there. Free seminars on various rod building topics with special people giving the classes such as Doc Ski & Emory Harryto name just a few. The seminars start there on Friday evening and will go all day Saturday.

See ya next Wednesday evening back here on the board.

Putter
Williston, ND

Is there some kind of schedule some where to tell us what is going on each day?

A quick check with Todd at Lamiglas will get you a schedule. Friday is BYOB, Saturday seminars.

Karry and I will be heading down Friday morning. I believe the seminars start at 6:00 pm Friday. BYOB(Build your own Blank) starts in the morning on Friday for the select few that get the pleasure and great opportunity to gain this knowledge of blank production,If you get a chance to do this take it..As far as the Saturday schedule I am not sure on the times. Karry and I will be there all evening on friday and all day saturday with some of our select products..
Come and Enjoy this gathering of knowledgeable folks in this industry. I know you will not be dissapointed with the gathering as Lamiglas is a class act in this industry. E-mail me if there are any specific items that you would like to see and touch, so I can make sure to bring them..
Thank you and I look forward to meeting as many of you as possible.

Bill Batson
CEO
Batson Enterprises
Rainshadow/Forecast/ALPS product lines.
877-875-2381
www.batsonenterprises.com
batson@batsonenterprises.com

Putter,
Wishing you and the others a great time at this event. Now I know how those who can't get to the ICRBE feel.
Dave

You might want to bring a rod along also. If you are coming this way, you might as well enjoy a little fishing while you are here.
The springer (spring chinook salmon) fishery is beginning to pick up.
If you catch one, it will all be worth it.

HL

Putter, keep an eye on Stan and try to keep him in line. Good luck and try not to bring to many blanks home with you.



Edited 1 time(s). Last edit at 04/11/2007 09:53PM by mark blabaum.

Tim,

Check your email. Todd just sent the schedule and I forwarded it.

Mark Griffin
[]
C&M Custom Tackle
San Dimas, California

All,

The basic schedule is as follows:

Friday, April 12
6:15 to 9:45
Guide Placement
Basic Rod building
Grip Turning
Color Change Weaving
Gudebrod Braids in decorative wraps

Saturday, April 13: 8:15 to 11:00
Supplier Presentations
Batsons, Pac Bay, American Tackle

10:00 to 6:30 pm
Wood insert and reel seat turning
Spiral Wrapping
EVA Installation
Basic Rod Building
Gudebrod Braids in Decorative Wraps
Color Change Weaving
Handle turning, cork and EVA
Guide Placement

There is a lunch break and also a pot luch planned for Saturday night.

Hope you can make the session. Should be fun.

Terry