SPONSORS
2024 ICRBE EXPO |
Thread color
Posted by:
Keith Lovegrove
(---.hfc.comcastbusiness.net)
Date: March 25, 2007 10:44PM
Hello everyone
Once again seeking your expert opinions,I will be building a Rainshadow RX7 flyrod with the color being OLYMPIC GREEN What thread colors have you used that looks good on this blank.Thanks in advance for your replies. Keith Thanks Keith Lovegrove Re: Thread color
Posted by:
Lance Dupre
(---.hsd1.la.comcast.net)
Date: March 25, 2007 11:39PM
Purple. Re: Thread color
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: March 26, 2007 12:36AM
I like gudebrod HT green & metalic gold on those blanks Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Thread color
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: March 26, 2007 10:33AM
Chestnut and copper or gold also look good. Re: Thread color
Posted by:
Russ Pollack
(64.241.28.---)
Date: March 26, 2007 10:52PM
As has been said above, the copper or gold metallics look great on these rods. Other choices would be in the green colors, either something that blends in or something with some serious contrast, but still in the green family.
Uncle Russ Calico Creek Rods Re: Thread color
Posted by:
Steve Wilson
(---.hsd1.mn.comcast.net)
Date: March 27, 2007 02:41PM
I built a 6wt earlier this year on that blank and used the black/dark green classic twist for the wraps and sunburst (200) for the trim bands. The yellow/black classic twist would also look good. Green, burt, and red cork look pretty cool on this blank too (so would laguna). Sorry, only registered users may post in this forum.
|