I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Lamiglass Tube Blank?
Posted by: Eric Schoolmaster (69.51.135.---)
Date: March 07, 2007 02:08PM

Anyone ever used any of those XMG Lamiglass blanks. I was thinking about getting the 7'2" for tubes. Never heard of anyone using one, I was just looking for some feedback on this line before I order one

Options: ReplyQuote
Re: Lamiglass Tube Blank?
Posted by: Jim Gamble (---.tampabay.res.rr.com)
Date: March 07, 2007 02:27PM

Very nice blanks, I have used quite a few and have been more than satisfied with the results.

Options: ReplyQuote
Re: Lamiglass Tube Blank?
Posted by: Spencer Phipps (65.197.242.---)
Date: March 07, 2007 02:48PM

Same here. The tube for grips if you want to go that way can be had from most sponsors. Batson is now making a tapered tube foregrip that looks like it may be able to be used for all kinds of things. They also have finished ends for everything they produce.

Options: ReplyQuote
Re: Lamiglass Tube Blank?
Posted by: Ellis Mendiola (---.dsl.hstntx.swbell.net)
Date: March 07, 2007 07:20PM

And I thought Eric was asking about a rod to use for casting tube baits.

Options: ReplyQuote
Re: Lamiglass Tube Blank?
Posted by: Jim Gamble (---.tampabay.res.rr.com)
Date: March 07, 2007 08:20PM

Me too!

Options: ReplyQuote
Re: Lamiglass Tube Blank?
Posted by: BobMcKamey (---.united.net)
Date: March 08, 2007 07:37AM

Lamiglas XMG blanks are fantastic blanks. The blanks are also priced righ for the extreme performance level of the XMG blanks. Models, LC, LMB, LP & LSJ are within the XMG series. The LSJ 862 would make a great tube bait rod and the addition of a Sensor Graphite tubing handle that we sell, would make a very nice addition to the perfromance level of the rod. XMG & Tubing for Tubes!! We carry all these fine products and would be glad to help assisit anyone.

Bob McKamey -- Custom Tackle Supply

Options: ReplyQuote
Re: Lamiglass Tube Blank?
Posted by: Eric Schoolmaster (69.51.135.---)
Date: March 08, 2007 11:51AM

Shoulda spesified more. The rod will be used for hurling tube jigs, as in good ole Michigan smallmouth tube jigs. Sounds good guys thanks for the feedback, I will purchase soon.

Options: ReplyQuote
Re: Lamiglass Tube Blank?
Posted by: Todd R. Vivian (---.lamiglas.com)
Date: March 09, 2007 02:27PM

Eric,
you won't be disappointed. We had smallies in mind when we initially developed this model.

Todd

Regards,
Todd Vivian
Mud Hole Custom Tackle

todd@mudhole.com

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster