SPONSORS
2024 ICRBE EXPO |
Threadmaster over LS Supreme...
Posted by:
Hunter Armstrong
(---.hsd1.va.comcast.net)
Date: February 21, 2007 03:42PM
I wanted to put down a light layer of finish on a matte blank in order to afix a decal. For that, I used LS Supreme. However, when I put on the finish on the guide wraps, I plan to use Threadmaster for a one coat finish. Is there any problem with putting the Threadmaster over the decal (and LS Supreme), also? Do I need to use the LS Supreme for that section? I would have used the new Threadmaster Lite, but my local supplier is still awaiting delivery. I can' imagine any problems, but I figured I'd better ask before the U40 dries. Thanks a lot.
Tight lines, Hunter From ghoulies and ghosties, and long leggedy beasties, and things that go bump in the night, Good Lord deliver us! Re: Threadmaster over LS Supreme...
Posted by:
Mike Barkley
(---.try.wideopenwest.com)
Date: February 21, 2007 03:43PM
No problem. The finishes are compatible Mike (Southgate, MI) If I don't want to, I don't have to and nobody can make me (except my wife) cuz I'm RETIRED!! Re: Threadmaster over LS Supreme...
Posted by:
Hunter Armstrong
(---.hsd1.va.comcast.net)
Date: February 21, 2007 03:45PM
Thank you very much!
Hunter From ghoulies and ghosties, and long leggedy beasties, and things that go bump in the night, Good Lord deliver us! Re: Threadmaster over LS Supreme...
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: February 21, 2007 03:56PM
Hunter,
Most of the 2 part finish's are compatable (one over the other). I use Aftcote as a 1st coat and Threadmaster as a 2nd final coat. DR Sorry, only registered users may post in this forum.
|