SPONSORS
2024 ICRBE EXPO |
ferrule wrap
Posted by:
allen forsdyke
(---.server.ntli.net)
Date: January 11, 2007 02:53PM
Hi me again wanna pick your brains....
push over ferrule insert length 85mm rod diameter 13.5mm rod length 10 feet what sort of length would you make the wrap its a graphite surf rod that will be taking a fair bit of "punishment" cheers Allen Re: ferrule wrap
Posted by:
Ted Morgan
(---.saix.net)
Date: January 11, 2007 03:18PM
The ferrule on such a heavy rod is more than likely reinforced or built heavy duty in some way. If you go by double the ferrule diameter, just over an inch would be about right. 2 inches wouldn't go amiss though, for extra "security". Re: ferrule wrap
Posted by:
allen forsdyke
(---.server.ntli.net)
Date: January 11, 2007 03:33PM
it doesnt appear that the blank is thicker at the ferrule .. normally i would just go twice the diameter but the two disconcerting factors are being graphite and being a heavy rod
Sorry, only registered users may post in this forum.
|