SPONSORS
2024 ICRBE EXPO |
Lamiglass LSJ700 sjr blank and ferrules
Posted by:
Rolfe Deppe
(217.33.127.---)
Date: January 05, 2007 08:35AM
Hi
I posted a little while ago asking for input on blanks - to which I had a great response - thanks! I have now decided what model - Lamiglass XMG50 LSJ700. The snag is I need it to be a 2- or 3-piece. My plan is to buy 2 blanks and use one for ferruling. Following the rule of thumb that ferrule wall thickness needs to be 2x blank wall, I plan to make double-wall ferrules using the scrap blank. Since I don't yet have the blank and can't handle one before ordering, I wondered if anyone could advise me whether the taper would allow at least a 2.5" overlap for a double wall ferrule. Is 2.5" long enough? If anyone has an other comments (especially the 'don't do it I tried and it didn't work' sort), please share them. I have looked everywhere for a factory 2 piece in the correct taper but to no avail. It seems that blanks made for the bass market are almost without exception 1-piece - perhaps a market perception that action or strength is somehow impeded? I have recently moved countries and don't have access to scrap bits of blank and a full workshop, so I need things to fit properly. Thanks Rolfe Re: Lamiglass LSJ700 sjr blank and ferrules
Posted by:
Bob Firebaugh
(---.csp-wy.client.bresnan.net)
Date: January 05, 2007 09:05AM
Rolfe,
You might want to read the article on Rod Repair in the library. Bob Re: Lamiglass LSJ700 sjr blank and ferrules
Posted by:
Rolfe Deppe
(217.33.127.---)
Date: January 05, 2007 10:22AM
Thanks Bob, the article is very useful. It sounds a little more complicated than I had hoped!
Regards Rolfe Re: Lamiglass LSJ700 sjr blank and ferrules
Posted by:
Spencer Phipps
(---.ptld.qwest.net)
Date: January 05, 2007 07:45PM
You would probably want a glass ferrule on that light a blank. Get with Andy Dear and get a comparable CTS 3 piece blank built. Great products at a great price. Re: Lamiglass LSJ700 sjr blank and ferrules
Posted by:
ROBERT WALDRON
(---.ca.astound.net)
Date: February 26, 2007 08:34PM
Rolfe-
What blank would you use for sturgeon? R.J. Sorry, only registered users may post in this forum.
|