SPONSORS
2024 ICRBE EXPO |
Looking for O rings
Posted by:
Paul Lindsey
(---.dsl.okcyok.swbell.net)
Date: December 05, 2006 06:16PM
Hey I just purchased a used Forecast wrapper but need the large O ring for the wrapping motor and drying motor and small O rings for the rod supports.
Anyone know the best place to get them? Thanks for the help Paul@soonercustomrod.com Re: Looking for O rings
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: December 05, 2006 06:27PM
Plumbing supply and heating supply places. Take rings with you so you can match up sizes. Most plumbing supply places will have the smaller ones and maybe larger ones. Heating supply most likely have the larger ones. Not lowes or home depot. Re: Looking for O rings
Posted by:
Paul Lindsey
(---.dsl.okcyok.swbell.net)
Date: December 05, 2006 06:28PM Re: Looking for O rings
Posted by:
C. Royce Harrelson
(---.proxy.aol.com)
Date: December 05, 2006 06:53PM
If there is a constructioin equipment dealer, ie Caterpillar, Komatsu, John Deere, Hitachi etc, go to their parts department. Most have an extensive inventory of o-rings. Take samples, or what you want them to fit on, or good dimensions. These places will have the good buna-n rings in 70 and/or 90 durometer. This is not necessarily always what you will get at hardware or home supply stores. Re: Looking for O rings
Posted by:
Mud Hole Custom Tackle
(---.233.204.68.cfl.res.rr.com)
Date: December 05, 2006 07:39PM
Large "O" rings and small "O" rings (and all the other parts for these wrappers) are available at:
[shop.mudhole.com] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Sorry, only registered users may post in this forum.
|