I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Loomis blank weights
Posted by: Adam Stewart (---.utc.edu)
Date: December 03, 2006 02:53PM

Does anyone know what either of the two following blanks weigh?

IMX MB844

GL3 MB844

I found a weight for the GL3 at CTS's website, but I worried that the listed weight may be dated--it appears the blank dimensions may have changed slightly.

Thanks,

Adam Stewart

Options: ReplyQuote
Re: Loomis blank weights
Posted by: Spencer Phipps (65.197.242.---)
Date: December 03, 2006 03:35PM

I haven't seen any published IMX weights since they went to the glass scrim which made them a little heavier quite a while ago. There are a lot nicer blanks from the sponsors to the left that still use graphite scrim and are lighter.

Options: ReplyQuote
Re: Loomis blank weights
Posted by: Todd Theodore (---.eos.net)
Date: December 03, 2006 04:58PM

I'm confused on how you found a Loomis blank weight on CTS' website. I don't even see the weight of their own blanks on their website.
If the lightest weight blank is what you're looking for, CTS is it.

Options: ReplyQuote
Re: Loomis blank weights
Posted by: Thomas Kaufmann (---.nmci.navy.mil)
Date: December 03, 2006 05:10PM

Todd,
Spencer was refering to Custom Tackle Supply (CTS) in Tennessee, not the New Zealand company in which you are refering to. I can see how this could confuse some people. I hope that this clears it up.

As far as the blanks are concerned, I too would go with the CTS!! Great blanks and the people with whom you will deal with (Andy) are TOP NOTCH

Tom Kaufmann
GySgt USMC

Options: ReplyQuote
Re: Loomis blank weights
Posted by: Bill Stevens (---.br.br.cox.net)
Date: December 03, 2006 05:22PM

In the new Mudhole Catalog most of the blanks have weights included in table listings - no weights listed for Gloomis.

On weights - if you look at Graphite USA they list three types of blanks - 1. dual helix - 2. dual helix with glass scrim & 3. non helix multi modulus glass scrim. Here is the real confushing part. Find a blank in a classification for action, length, power, lure wt which are all equal and the weights of the blanks are almost identical. The primary difference is the price and all are advertised as superior. What is a builder supposed to do when this information is in the hands of a potential customer. Getting pretty complicated.

Options: ReplyQuote
Re: Loomis blank weights
Posted by: Adam Stewart (---.utc.edu)
Date: December 04, 2006 08:44AM

I was referring to Custom Tackle Supply...sorry for the confusion.

I noted the similarities among the various Hastings blanks, too, and wondered if it was a typo in the Mudhole catalogue? I suppose we could look at Hasting's site and find out.

Adam Stewart

Options: ReplyQuote
Re: Loomis blank weights
Posted by: Pavel Novolokin (---.pppoe.mtu-net.ru)
Date: January 19, 2007 04:18PM

Excuse me, Spencer, for a kinda strange question: where did you know from about G.Loomis had switchied scrim for IMX blanks?

Pavel,
Moscow, RU

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster