I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Hi-build epoxy data?
Posted by: Craig Clements (---.187-72.tampabay.res.rr.com)
Date: November 28, 2006 10:49AM

Hello,

I don;t want to start a arguement over which is better, I'm sure it all depends on your desired application.

My question is does anyone happen to have the technical data sheets for Flex-Coat hi-build Ultra V and LS Supreme Hi-Build?

I'm trying to figure out which is better for my application, and would like to know the shore D hardness, flexural modulus, impact strength etc. Most epoxies have this posted on their website (Devcon, System Three, etc.), but I've been unable to find it for these two.

Thanks All!

Craig Clements

Options: ReplyQuote
Re: Hi-build epoxy data?
Posted by: Anonymous User (Moderator)
Date: November 28, 2006 11:08AM

Flex Coat, although they don't actually make the product, should be able to get it for you. Trondak makes the U-40 products and surely would be able to provide it. I'd write both companies directly and ask. Try their email addresses first. John Anderson at Flex Coat is particularly helpful. Somebody at Trondak, maybe even Ralph O'Quinn, will respond.

...........

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster