I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

I need a blank tip section for a rshadow RX8 9/9wt 3 pc ASAP!!
Posted by: Chris Santemma (---.nycmny.fios.verizon.net)
Date: July 23, 2006 09:01PM

I just snapped off the tip section off my rainshadow RX8 9-9wt 3pc when i rolled up my window and I didn't even get my line wet.

please let me know where i might find a suitable replacement tip section.

i'm going down to N.C. in 2 weeks and was hoping to bring that 3pc(now a 4 piece).

many thanks in advance.
Chris

Options: ReplyQuote
Re: I need a blank tip section for a rshadow RX8 9/9wt 3 pc ASAP!!
Posted by: Anonymous User (Moderator)
Date: July 23, 2006 09:12PM

Batson Enterprises would be the very best place to contact.

............

Options: ReplyQuote
Re: I need a blank tip section for a rshadow RX8 9/9wt 3 pc ASAP!!
Posted by: Bill Colby (---.int.bellsouth.net)
Date: July 24, 2006 08:51AM

They will have to fit you a new one or provide an entire new blank. Cost should be reduced. Check with Batson Enterprises.

Only thing I don't like these days is that instead of getting a new tip most companies just send you a new complete blank and you have to rebuild the butt section as well.

Options: ReplyQuote
Re: I need a blank tip section for a rshadow RX8 9/9wt 3 pc ASAP!!
Posted by: Chris Santemma (---.nycmny.fios.verizon.net)
Date: July 24, 2006 05:29PM

Tom thanks for the advice just spoke with them and hopefully they can find something at the factory for me to use.

Also, i have some pics of some the cork handle ingraving/inlay work that i been working on. very labor intensive but ads a nice touch. where can i e-mail them to you?

best,
Chris

Options: ReplyQuote
Re: I need a blank tip section for a rshadow RX8 9/9wt 3 pc ASAP!!
Posted by: Scott VanGuilder (---.client.mchsi.com)
Date: July 25, 2006 06:03AM

Why not just post them on the photo posting page???

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster