SPONSORS
2024 ICRBE EXPO |
Decal/label question
Posted by:
John Richardson
(---.dhcp.ahvl.nc.charter.com)
Date: July 15, 2006 05:11PM
I am working on a decal or label as described in RodMaker Magazine Vol 9 Issue 3. I can do it on an ink jet like described in the article. However, I also have access to a very high quality color laser printer. If I printed the label on a color laser printer, would that work just as well as if it were done with an ink jet printer?
I realize that a laser printer uses fused toner instead of ink to make the image. That is what is making me wonder if it will work given that it will be coated with spray acrylic plus color preserver plus epoxy. Thanks for the help and suggestions. -john Waynesville, North Carolina -- Gateway to the Smokies Re: Decal/label question
Posted by:
John Richardson
(---.dhcp.ahvl.nc.charter.com)
Date: July 15, 2006 05:14PM
I had a question about using a laser printer but I should have searched the archives first! I got my question answered.
Thanks -John Sorry, only registered users may post in this forum.
|