SPONSORS
2024 ICRBE EXPO |
Rikon Lathe
Posted by:
Wesley McGee
(68.221.243.---)
Date: June 27, 2006 03:05PM
Looking at the Rikon 70-100 mini lathe. In the specifications for this unit, the TPI for the head stock chuck is not listed. Anyone know if it is 1"x8tpi or 3/4"x16tpi? Thanks for your responses.
Wesley McGee McGee's Custom Rods Jacksonville, NC. Re: Rikon Lathe
Posted by:
Sammy Mickel
(---.r4.ncreed.infoave.net)
Date: June 27, 2006 05:19PM
It's the same as the other mini lathe brands, I believe 1x8 tpi is right. I love mine just can't get enough time to get on it. Re: Rikon Lathe
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: June 28, 2006 05:26PM
Don't know about your's, but my PSI Turncrafter Pro is 1" x 8 tpi. Bill in WV Sorry, only registered users may post in this forum.
|