SPONSORS
2024 ICRBE EXPO |
Re: Black thread without CP and metallic underwraps
Posted by:
Michael Shea
(203.57.223.---)
Date: June 26, 2006 10:14PM
Please see my last message posted under this thread:
[www.rodbuilding.org] I didn't realise that the thread I replied to wouldn't be bought back to the first page, so I've had to create this new thread. Re: Black thread without CP and metallic underwraps
Posted by:
eric riggs
(---.nyc.res.rr.com)
Date: June 26, 2006 10:33PM
NO -the metallic thread will NOT show through your non NCP-reg nylon -black thread.unless,
you do a bad job of packing. Re: Black thread without CP and metallic underwraps
Posted by:
Joe Brenner
(---.swifttrans.com)
Date: June 27, 2006 09:59AM
This is part of the beauty of black...a very classy look w gold or silver trim and goes with any color blank. Re: Black thread without CP and metallic underwraps
Posted by:
LARRY PIRRONE
(---.att.net)
Date: June 27, 2006 04:12PM
as eric suggests, this will show bad packing very quickly. you will have to do a meticulous job of packing the thread or you will get little silver micro gaps that will show up like a sore thumb. Re: Black thread without CP and metallic underwraps
Posted by:
LARRY PIRRONE
(---.att.net)
Date: June 27, 2006 04:14PM
one other thing. you should probably coat the metalic before you wrap your black. otherwise the black thread will be very hard to pack. it will sit between the strands of silver met. i would use sulkey metalic for this since it is not as coarse as gudbrod and will create a better surface for your overwrap. Re: Black thread without CP and metallic underwraps
Posted by:
Michael Shea
(203.57.223.---)
Date: June 27, 2006 05:49PM
Thanks for the reassurance guys.
Just another query in regards to the tight packing required on the black thread. Has anyone ever "cheated" and actually spray painted (or colour in some other method) the metallic threads that will ultimately get hidden by the black thread? I know there is still a place to pack tightly, but I would think that if the metallics weren't that noticable, then hopefully if there were any gaps in the black thread, the underlying metallic won't show up as much as an unpainted one. Sorry, only registered users may post in this forum.
|