SPONSORS
2024 ICRBE EXPO |
how to do a 4 point box wrap?
Posted by:
luis F. deleon
(---.proxy.aol.com)
Date: June 02, 2006 09:14PM
do i start and finish one side like top and bottom then do the 90 deg turn and do the side to side so that i would see boxes at four postions around the blank? or do i do it all at the same time? hope i explained myself.
thanks luis Re: how to do a 4 point box wrap?
Posted by:
Michael Joyce
(---.proxy.aol.com)
Date: June 03, 2006 04:42AM
Do all at the same time, start to finish. I'm assuming your trying to do diamonds (boxes) on four sides (axis) of the blank Re: how to do a 4 point box wrap?
Posted by:
John Bumstead
(---.s661.apx1.lnh.md.dialup.rcn.com)
Date: June 03, 2006 11:07AM
Luis: Do you want the finished wrap to resemble an egg crate? What I mean is that looking at it, you get the impression of looking into individual crates. John Re: how to do a 4 point box wrap?
Posted by:
luis F. deleon
(---.proxy.aol.com)
Date: June 03, 2006 08:59PM
it's not a dimond wrap i widh i can give a link to it but i'l try to explain basically you start it as two starter threads and work your way in it looks like a four way shevron faceing each other and a box in the middle. i just would like to see it all the way around the blank.
Edited 1 time(s). Last edit at 06/03/2006 09:06PM by luis F. deleon. Sorry, only registered users may post in this forum.
|