SPONSORS
2024 ICRBE EXPO |
Color difference between AmTak Titaniums and Fuji Titaniums
Posted by:
Jan-Ole Willers
(---.adsl.hansenet.de)
Date: May 25, 2006 05:07AM
Hello out there,
it seems that I have to combine the AmTak Titanium Guides (NIC, as strippers in #20 and #16) with a Fuji Titanium Tip top (TFST) or Titanium coated Tip top (ICFST) because Fuji does not have a low stripping guide in #20 / Titanium or Titanium coated. Is there anybody out there who has experiences with the colors of the mentioned frames or who can tell me how big is the difference in color between the mentioned fram materials? If possible it should look identical in regard of the color. What about the color of the AmTak SS Tip Tops which are (acc to their info) looking the same in regard of the frame color. Photo woudl be great. Yr. 2 cents please. RGDS, Ole Re: Color difference between AmTak Titaniums and Fuji Titaniums
Posted by:
Phil Richmond
(---.fleet.navy.mil)
Date: May 25, 2006 07:25AM
The Amtacks are a good bit lighter than the Fuji's, which tend to be more greyish.
The SS tops match the Amtack guides ok, cause their titanium is a lighter color. Phil Re: Color difference between AmTak Titaniums and Fuji Titaniums
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: May 25, 2006 07:54AM
It would take a very close observer to tell the difference in color. Most fishermen either do not notice or do not care - they are after the durability of the frames in saltwater or the light weight construction. Re: Color difference between AmTak Titaniums and Fuji Titaniums
Posted by:
bill boettcher
(---.250.147.221.Dial1.Weehawken1.Level3.net)
Date: May 25, 2006 08:09AM
If it is for salt I would use the Fuji Ti top Re: Color difference between AmTak Titaniums and Fuji Titaniums
Posted by:
Keith Neidhart
(---.hot.res.rr.com)
Date: May 26, 2006 06:33AM
The ICFST and the TFST are two very different colors/looks. The ICFST does not match the Fuji Ti framed guides... not even close. The ICFST is almost the color of Gudebrod Pewter metallic thread, it has that bronze look to it. (still not sure why they call that thread color pewter)
I believe the chrome is even closer in color to Ti than the ICFST. (at least you can tone the shine down in chrome) Re: Color difference between AmTak Titaniums and Fuji Titaniums
Posted by:
Spencer Phipps
(---.onsemi.com)
Date: May 27, 2006 06:08PM
Does Am Tack, Pac Bay or Batson stii make a guide with a TiCH coated frame and ceramic ring that come close? One of my 10 wts have some guides that are close to the Fujis, I think they were Batsons, but not 100% positive. Getting them from Dan Craft makes me think they were. Sorry, only registered users may post in this forum.
|