I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Flyseat weights needed
Posted by: Jan-Ole Willers (---.adsl.hansenet.de)
Date: May 14, 2006 06:59AM

Hello to all,

I intend to build up a RPLXI 990-3 (Sage blank RPLXI 9ft, #9, 3-piece) and thinking anbout the RSLL from REC-components and the U-18 from Struble. The weight of both seats will also influence my decision. Do you know what is the weight of the mentioned models?

Regards from the Baltic Sea,
Ole

Options: ReplyQuote
Re: Flyseat weights needed
Posted by: eric zamora (---.dsl.frs2ca.pacbell.net)
Date: May 14, 2006 11:20AM

Ole, if you don;t get a reply to your message, email REC. they've been very helpful and prompt with questions for me in the past and could probably provide you with the weight. struble as well.

eric
fresno, ca.

Options: ReplyQuote
Re: Flyseat weights needed
Posted by: Ralph D. Jones (---.bhm.bellsouth.net)
Date: May 14, 2006 04:05PM

Don't forget Golden Witch's reelseats. Ralph

If at first you don't succeed, go fishing, then try, try again.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster