I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Renzetti Rod Lath
Posted by: Bob Balcombe (---.rb.gh.centurytel.net)
Date: May 04, 2006 03:14PM

I would like to thank Andy Renzetti for all the help in up grading my old lath. It was a pleasure talking with him. He is a wealth of knowledge. Thank You Andy
Good Wraps Bob

Options: ReplyQuote
Re: Renzetti Rod Lath
Posted by: Emory Harry (67.170.180.---)
Date: May 04, 2006 06:39PM

Bob,
Only one misspelled word. You must have replaced the fuse in your spell checker again. A lath is something that you nail up on a wall and then plaster over it.
Sorry but I could not resist. You haven't been around for awhile for me to pick on. Seriously I hope that you are doing well.

Options: ReplyQuote
Re: Renzetti Rod Lath
Posted by: Anonymous User (Moderator)
Date: May 04, 2006 07:05PM

The folks at Renzetti have already committed to the 2007 International Rod Building Exposition - for 2 booth spaces. Andy's wife, Lily, will be attending this year as well. Expect to see some new rod building products from them this year.

...........

Options: ReplyQuote
Re: Renzetti Rod Lath
Posted by: Bob Balcombe (---.rb.gh.centurytel.net)
Date: May 05, 2006 10:09AM

Emory the word was spelled right, but I used the wrong word LOL. Karen and I are just fine . I am now working on a 2wt fly rod.
Good Wraps Bob

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster