I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Hex metal Rod
Posted by: Ken Poole (---.131.217.147.Dial1.SanJose1.Level3.net)
Date: April 14, 2006 08:38PM

Hi all. I found a 9 ft. metal,hex,telescopic,olive green with aluminum and cork handle with the name "Bristol" on the reel seat.Anyone know anything about thyis contraption....Thanx

Options: ReplyQuote
Re: Hex metal Rod
Posted by: Shawn Moore (85.195.119.---)
Date: April 14, 2006 09:03PM

They use to make them all like that for a period of a few years. I have one but I think it's a Bronson and it's grey and also hexagonal. I asked at a regional antique tackle club meeting once and they told me it was worth from $5 to $10. I hung onto it for a keepsake more than anything else.

Options: ReplyQuote
Re: Hex metal Rod
Posted by: john broughton (---.iad.untd.com)
Date: April 14, 2006 11:54PM

I have one like you describe, with Bristol on the reel seat.
It's worth about $15.00 if in good condition. Not really valuable but an example
of earlier rod production.

John

Options: ReplyQuote
Re: Hex metal Rod
Posted by: Art Parramoure (---.252.150.183.Dial1.Chicago1.Level3.net)
Date: April 15, 2006 12:17AM

Ditto to the above, not a priceless antique, but a neat collectable from an era of rod making.

I get them in once in a while for repair, usually the guide that stops the inner section from going too far when telescoping out will let loose and the rod comes apart. If you run into that problem, J B WELD will do the truck... just be sure to line up the guides with the reel seat ~~

Tight lines to all ~ ~

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster