SPONSORS
2024 ICRBE EXPO |
Best resource for "how to" on chevron butt wraps
Posted by:
Craig Godwin
(---.neo.res.rr.com)
Date: March 31, 2006 01:04AM
I'm on my second rod and did an open diamond wrap on my first rod. I would like to do a chevron on my second and was looking for good instruction on the how to's, is there a good resource out there?
Thanks, Craig Edited 1 time(s). Last edit at 03/31/2006 01:04AM by Craig Godwin. Re: Best resource for "how to" on chevron butt wraps
Posted by:
David Boyle
(---.dsl.vic.optusnet.com.au)
Date: March 31, 2006 02:35AM
[www.leapinbass.com]
Look at the menu on the left hand side of the page. If you had the VisualWRAP software you could see any number of cross wrap patterns being "wrapped" on your screen, then shown in 3D, in various colours, and printed true-to-size. Regards Dave Boyle www.visualwrap.com Re: Best resource for "how to" on chevron butt wraps
Posted by:
Anonymous User
(Moderator)
Date: March 31, 2006 08:55AM
The chevron is done just like a diamond, except you build on only one side of the centers instead of both sides. If you can do a diamond, you've pretty much already done a chevron - you just did two of them on opposing sides.
........... Re: Best resource for "how to" on chevron butt wraps
Posted by:
Lou Reyna
(---.pinn.net)
Date: March 31, 2006 11:00AM
I won't post another site's url here, so tried to email you but your email address is hidden. There are some excellent instructions out there free for download.
Lou Re: Best resource for "how to" on chevron butt wraps
Posted by:
allen forsdyke
(---.server.ntli.net)
Date: April 01, 2006 04:59AM Re: Best resource for "how to" on chevron butt wraps
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: April 01, 2006 04:54PM
Loneranger, I would repost using your full name (first and Last) as required by site rules as it will probably be automattically deleted before Lou gets to see it
Mike Sorry, only registered users may post in this forum.
|