SPONSORS
2024 ICRBE EXPO |
Wrighting on a decal ???
Posted by:
bill boettcher
(---.an3.nyc41.da.uu.net)
Date: March 29, 2006 11:11AM
Hi guys
Has any one tried to wright on a Decal Connection stick on decal with a gel pen, and then put it on a rod ? Then maybe CP and clear ? Should work ?? Thanks Re: Wrighting on a decal ???
Posted by:
Bob Firebaugh
(---.communicomm.com)
Date: March 29, 2006 11:36AM
Bill: Writing with gel pen; then spray, clear fixative worked just fine on my last rod. /s/Bob Re: Wrighting on a decal ???
Posted by:
bill boettcher
(---.an3.nyc41.da.uu.net)
Date: March 29, 2006 11:46AM
Thanks Bob having some made up for those blanks that don't have decals with them. Re: Wrighting on a decal ???
Posted by:
Mark Griffin
(---.lsanca.dsl-w.verizon.net)
Date: March 29, 2006 12:48PM
Hi Bill,
I've done it with their "peel & stick" sheets and water based acrylic artists ink which is available anywhere they sell calligraphy pens. Most Art stores stock it. No need to coat with CP or clear Krylon, you can go right to finish directly over this ink. Take care in applying the decal, because air bubbles don’t work out from under these peel & sticks like they do with waterslides. Mark Griffin [] C&M Custom Tackle San Dimas, California Re: Wrighting on a decal ???
Posted by:
bill boettcher
(---.an1.nyc41.da.uu.net)
Date: March 29, 2006 02:52PM
I have good luck with the peel and stick. Thanks Sorry, only registered users may post in this forum.
|